Господа, может кто поможет. НСР СС 6634.
При приеме наличных, после обработки купюр на экране высвечивает всякая абракадабра.
Знаю что это прописывается в файле resvrvd.def экран 'M10' ('M10' 'GF%GB%IBrjkbxtcndj %' - прописано сейчас) примерно эта строчка и выдается на экран. Вот что там прописать, чтоб было все красиво???????????
Варианты поставщика оборудования не подошли (результат тот же).
Если кому не лень, вышлите Ваш вариант файла resrvd.def, он находится (должен) в папке c:\ssds\dll\
Можно на antonmi@uralfd.ru
Показ количества принятых купюр на 6634
Модератор: central
Показ количества принятых купюр на 6634
такая же хрень, поделитесь знаниями кто знает... в референсе написано:
The default Confirmation screens are M10 and M11, held in the
resrvd.def file. If ECB 6 mode 1 is used and notes are retained as
counterfeit or suspect, screens M13 and M14 are used instead of
M10 and M11. These screens contain an extra line displaying the
retained note counts. These screens contain displays of the
deposited note denominations. The enhanced BNA screens, U0104
and U0105 can be used instead.
These screens can be replaced with downloaded user screens by
modifying the relevant worker in the Author to reference a user
screen number. However, user screens cannot display the deposited
note denominations information. You can also update resrvd.def to
reference the screen by using the SO command (for example C02).
When the notes deposited are all at the escrow position and are all
valid, the screen defined by the Confirmation Screen table entry is
displayed, and the Add More/Deposit/Refund Key Mask table
entries are used to define the active FDKs.
If the cardholder selects the Add More FDK (specified in the Add
More Key Mask table entry) from the Confirmation screen, the
screen defined by the Please Enter Notes Screen table entry is
displayed, and the Cancel Key Mask table entry is used.
If no deposit is made after selecting Add More Notes at the
confirmation screen and before timer 77 expires, the Timeout State
followed by the Timeout Next State Number table entry is executed.
If a deposit is made before timer 77 expires, the Processing Notes
Screen table entry is displayed until the notes have been processed.
The default Confirmation screens are M10 and M11, held in the
resrvd.def file. If ECB 6 mode 1 is used and notes are retained as
counterfeit or suspect, screens M13 and M14 are used instead of
M10 and M11. These screens contain an extra line displaying the
retained note counts. These screens contain displays of the
deposited note denominations. The enhanced BNA screens, U0104
and U0105 can be used instead.
These screens can be replaced with downloaded user screens by
modifying the relevant worker in the Author to reference a user
screen number. However, user screens cannot display the deposited
note denominations information. You can also update resrvd.def to
reference the screen by using the SO command (for example C02).
When the notes deposited are all at the escrow position and are all
valid, the screen defined by the Confirmation Screen table entry is
displayed, and the Add More/Deposit/Refund Key Mask table
entries are used to define the active FDKs.
If the cardholder selects the Add More FDK (specified in the Add
More Key Mask table entry) from the Confirmation screen, the
screen defined by the Please Enter Notes Screen table entry is
displayed, and the Cancel Key Mask table entry is used.
If no deposit is made after selecting Add More Notes at the
confirmation screen and before timer 77 expires, the Timeout State
followed by the Timeout Next State Number table entry is executed.
If a deposit is made before timer 77 expires, the Processing Notes
Screen table entry is displayed until the notes have been processed.