Калибровка монитора

[Baha]

Пожалуйста подскажите как правильно откалибровать панель инженера (монитор) на банкомате Self-Serv6626?

[Dan]

1. From the System Application Main Menu select the option Self-Service
Configuration.
2. Select Set Device Configuration.
3. Select USBGOP to perform the calibration test.
4. A touchscreen target will appear four times. Press the target each time, then repeat the
test when prompted to confirm the calibration.
The test can be carried out on the GOP or with the application transferred to the front
interface. You will have 90 seconds to perform the test on the rear panel and 300 seconds
to perform the test on the front of the ATM.