Since I couldnt get an answer in the NCR forum I will give it a try here.
Does anyone know how I can disable slot 4 besides removing the cassette on a Persona 86 ATM? I want the ATM not to see slot 4 at all in the software. I am using two dual pick interface boards as I dont have a single pick interface board. I tried going into the registry and making some changes but no luck.
Any ideas anyone?
Thanks in advance..
5886 CDM
Please, create your topics here (Any questions)
- TOPOC
- Специалист
- Сообщения: 416
- Зарегистрирован: 23 янв 2012, 01:58
- Авто: Nissan Fairledy Z
- Откуда: Россия
- Благодарил (а): 6 раз
- Поблагодарили: 22 раза
Re: 5886 CDM
Непрочитанное сообщение TOPOC »
Do you want that the ATM wouldn't see the 4th cartridge in the software? What software you use?
Прихожу рано, ухожу поздно. Такова ирония жизни!
TOPOC
-
- Специалист
- Сообщения: 233
- Зарегистрирован: 07 ноя 2011, 17:20
- Благодарил (а): 7 раз
- Поблагодарили: 8 раз
Re: 5886 CDM
Непрочитанное сообщение VIK007 »
do not see the reason. Explain why disable fourth module?
VIK007
-
- Местный
- Сообщения: 75
- Зарегистрирован: 11 июн 2011, 14:10
- Благодарил (а): 2 раза
- Поблагодарили: 7 раз
Re: 5886 CDM
Непрочитанное сообщение ATMtech »
Correct I dont want the software to see Cassette 4 Installed and I am using NCR APTRA. The reason for this is because the bank does not use slot 4 and we a software that monitors the ATM. If the software detects there is no cassette installed in slot 4 it will generate several error tickets. So I need to make it think there is only 3 cassettes installed using a dual pick interface board.
I have tried removing pins from the pick board to see if that would work but the ATM still showed cassette 4 missing.
I have tried removing pins from the pick board to see if that would work but the ATM still showed cassette 4 missing.
ATMtech
VIK007
-
- Местный
- Сообщения: 75
- Зарегистрирован: 11 июн 2011, 14:10
- Благодарил (а): 2 раза
- Поблагодарили: 7 раз
Re: 5886 CDM
Непрочитанное сообщение ATMtech »
That doesnt work, I will still get errors. I need a way to disable slot 4.
ATMtech