NCR 5886 With ProCash-Doesn't print in russian and hostsim
NCR 5886 With ProCash-Doesn't print in russian and hostsim
Hello. A project we currently have, requires to install ProCash 3 on our NCR 5886 ATM, Everything seems fine until we tried to print Cyrillic symbols (Russian). We only managed to make the Cyrillic symbols disappear. So any help will be appreciated.
Another issue we faced is the hostsim - it accepts the test cards the bank gave us but once the pin is entered it rejects the card. (Some kind of DOS-like Wincor-Nixdorf Demo Network)
Installed software:
Aptra-XFS 5
ProCash 3.0
Another issue we faced is the hostsim - it accepts the test cards the bank gave us but once the pin is entered it rejects the card. (Some kind of DOS-like Wincor-Nixdorf Demo Network)
Installed software:
Aptra-XFS 5
ProCash 3.0
- Dan
- Нач. отдела
- Сообщения: 2817
- Зарегистрирован: 29 окт 2010, 00:20
- Благодарил (а): 44 раза
- Поблагодарили: 96 раз
Re: NCR 5886 With ProCash-Doesn't print in russian and hosts
Scientists study the world as it is, engineers create the world that never has been
Re: NCR 5886 With ProCash-Doesn't print in russian and hosts
Unfortunately it does not help me. I believe the AptraXFS isn't installed correctly.
Any documentation for AptraXFS 5 - installation/user manual?
Any documentation for AptraXFS 5 - installation/user manual?
-
- Новичок
- Сообщения: 38
- Зарегистрирован: 13 ноя 2010, 23:47
- Авто: hundai
- Поблагодарили: 1 раз
Re: NCR 5886 With ProCash-Doesn't print in russian and hosts
try
\1b(1 == <esc>(1 - Set Cyrillic symbols.
Код: Выделить всё
[HKEY_LOCAL_MACHINE\SOFTWARE\Wincor Nixdorf\ProTopas\CurrentVersion\CCOPEN\RECEIPT]
"MACRO_TABLE"="RECEIPT_MACROS"
"MACRO_TABLE_ACTIVE"="1"
"INIT"="\1b(1"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wincor Nixdorf\ProTopas\CurrentVersion\CCOPEN\CCPRTFW\RECEIPT_MACROS]
"CPI15"="\1b(1"
"USA"="\1b(1"
Re: NCR 5886 With ProCash-Doesn't print in russian and hosts
after restart it started to print ###(1 with no reasonAlexandrV писал(а):\1b(1 == <esc>(1 - Set Cyrillic symbols.
-------------
PS: this is the AptraXFS test page before installing ProCash.
http://i.imgur.com/v4pxGbD.jpg
Re: NCR 5886 With ProCash-Doesn't print in russian and hosts
Still no progress. I've changed all the fonts in the register(regedit) but can't find which are used for the receipt printer
Re: NCR 5886 With ProCash-Doesn't print in russian and hosts
Hello again,
I have a little progress here with what can be actually printed from 20 to FF (in HEX)
[HKEY_LOCAL_MACHINE\SOFTWARE\NCR\APTRA Self-Service Support (NCR Features)\Pc40ColumnThermalPrinters\Operational Parameters]
"Character Set"="Cyrillic"
Setting the following register with "Cyrillic" value makes the printer to print lower case Latin letters.
Are there any other types I can use for this register?
I have a little progress here with what can be actually printed from 20 to FF (in HEX)
[HKEY_LOCAL_MACHINE\SOFTWARE\NCR\APTRA Self-Service Support (NCR Features)\Pc40ColumnThermalPrinters\Operational Parameters]
"Character Set"="Cyrillic"
Setting the following register with "Cyrillic" value makes the printer to print lower case Latin letters.
Are there any other types I can use for this register?
-
- Прохожий
- Сообщения: 1
- Зарегистрирован: 14 янв 2012, 09:29
Re: NCR 5886 With ProCash-Doesn't print in russian and hosts
try this for Cyrillic on NCR with ProCash
Код: Выделить всё
[HKEY_LOCAL_MACHINE\SOFTWARE\Wincor Nixdorf\ProTopas\CurrentVersion\CCOPEN\CCPRTFW]
"RESET"="\\1bw13\\1b:866"
"PRINTERTYPE_ND97"="FALSE"
"INIT"="\\1bw13\\1b:866"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wincor Nixdorf\ProTopas\CurrentVersion\CCOPEN\CCPRTFW\RECEIPT_MACROS]
"CCT"="\\1b%866"