банкомат работает по IP при восстановлении связи после разрыва не всегда становится в сервис. отмечается в остновном именно на 6622. на банкомате установлена AANDC 3.3.2.
вот что отражается в журнале:
[05pSST OFF-LINE[00p
[020t*202*16/05/2011*16:24*
[05pSST OFF-LINE[00p
[020t*203*16/05/2011*17:33*
[05pSST ON-LINE[00p
И всё.
Нет записи "IN SERVICE"...
подскажите есть ли в Advanced IP настройках параметры отвечающие за поднятие в сервис после восстановления связи?
NCR 6622 по IP
Модератор: central
-
olegka_n
- Нач. отдела
- Сообщения: 1347
- Зарегистрирован: 18 июн 2010, 18:21
- Откуда: Сибирь
- Благодарил (а): 26 раз
- Поблагодарили: 41 раз
NCR 6622 по IP
Может стоит пробовать прогружать конфигурацию после загрузки - супервизор-5-10 и там 0-Diebold equivalent? А вообще смахивает на проблемы на хосте....
Спойлер
0 - Default. A configuration data reload is attempted from disk if
the configuration ID is present. Comms/MAC keys revert to B
key. A power failure status is sent.
1 - Diebold equivalent. No configuration data reload is
attempted and the configuration ID is reset. Comms/MAC keys
revert to B key. A power failure status is sent.
2 - Native Mode (NCR). A configuration data reload is
attempted from disk if the configuration ID is present.
Comms/MAC keys retain their current value if the
configuration data reload is successful, otherwise they revert to
B key. A power failure status is sent.
3 - Auto recovery. A configuration data reload is attempted if
the configuration ID is present. If successful, Comms/MAC
keys retain their current value, no power failure status is sent,
and the previous operating mode is re-entered. If configuration
data is not reloaded, the configuration ID is reset. Comms/MAC
keys revert to B key. A power failure status is sent.
the configuration ID is present. Comms/MAC keys revert to B
key. A power failure status is sent.
1 - Diebold equivalent. No configuration data reload is
attempted and the configuration ID is reset. Comms/MAC keys
revert to B key. A power failure status is sent.
2 - Native Mode (NCR). A configuration data reload is
attempted from disk if the configuration ID is present.
Comms/MAC keys retain their current value if the
configuration data reload is successful, otherwise they revert to
B key. A power failure status is sent.
3 - Auto recovery. A configuration data reload is attempted if
the configuration ID is present. If successful, Comms/MAC
keys retain their current value, no power failure status is sent,
and the previous operating mode is re-entered. If configuration
data is not reloaded, the configuration ID is reset. Comms/MAC
keys revert to B key. A power failure status is sent.